Rating of the best water coolers of 2022

This model has less modest dimensions and larger tanks: for cold water — 3 liters, for hot — 1.2 liters. A compressor cooler with a five-year compressor warranty is suitable for a small office, hotel room, or shared kitchen in a hostel. Heating power — 650 W, cooling — 100 W. The design used a tubular heater. With such characteristics, it is possible to obtain up to 5.5 liters of hot water and about 2 liters of cold water per hour. Separate faucets for cold and hot water, pouring — by pressing a glass on the faucet tongue. The device is relatively inexpensive and lacks the “chips” of premium models, for example, the drop-stop function, after removing the glass from the pouring tab, a few drops fall into the water collection tray. Device dimensions: 31×34.5×50.5 cm. Russian product, made in China, 2-year warranty.

This desktop cooler model is equipped with a 700 W heater, water cooling is electronic (70 W). The bottle is installed on the body from above. You can use bottles with a capacity of 12, 19 and 23 liters. Pouring occurs by pressing the glass on the lever of the spout of the tap. Heating capacity is about 7 l/h, cooling capacity is about 1 l/h. A good inexpensive cooler for the home. Device dimensions: 31x29x43.5 cm. The brand originated in Russia, made in China. Warranty — 2 years, subject to purchase on the company’s website or in a company store, in other cases, the warranty period is a year.

Relatively compact desktop cooler with a compressor cooling system. Mounted on a table or cabinet. The position of the bottle is up. You can use containers of 11.3 and 18.9 liters. The device is equipped with three taps for water supply: cold / hot / room temperature. Heating capacity — 5.5 l / h, cooling — 2 l / h. Based on the average consumption of drinks, the cooler is designed to serve about 20 visitors (or employees) per day. Russian brand, Chinese version, 2 year warranty.

Desktop cooler for cooling and heating bottled water. Heating power is 700 W, cooling power is 70 W. During cooling, the temperature drops by 12-14°C relative to the room temperature. The control keys are spaced in different corners of the rear panel: it is convenient without looking to unmistakably activate or deactivate the heating and cooling processes. Pouring occurs through taps on the front panel with levers for pressing the edge of a glass or mug. The device is simple, without unnecessary complications, therefore, to save energy, you must manually disconnect it from the mains when not in use, for example, in the office on weekends. Additionally, you can purchase a glass holder and attach to the side wall. A completely Russian product, if there is an R in the marking, in other cases it is made in China, the guarantee is 2 years.

One of the top sellers among desktop water coolers with electronic cooling. A sort of compact and lightweight device of the economy class, which is nevertheless capable of effectively heating and cooling drinking water.

The model is equipped with two taps of hot and cold water with keys for pressing a cup. For those who find it more convenient to open the water supply by hand, there is an alternative model for about the same money — TD-AEL-36.

The heating (90°C) and cooling (<15°C) performance is 5 and 0.7 l/h, respectively. From this we can conclude that the TD-AEL-340 is able to act as a more efficient replacement for a kettle for a small or even medium-sized office. But he is unlikely to be able to supply cold water to a large team in the summer, and as such is more suitable for a home or work space with a small number of employees.

An elegant floor standing water cooler with top placement of the bottle is made of plastic. Heating power — 650 W, cooling — 120 W, such characteristics provide hot water performance — 6 l / h, cold — 2 l / h. The control is located on the side panel: two separate keys for cold and heating. Overall dimensions: 31x34x98 cm. Country of origin — China, warranty — 2 years.

Floor cooler for dispensing hot, cold water, stable, easy to operate, with a heating power of 700 W, and a compressor cooling power of 90 W. The location of the bottle is top, inverted. Productivity for hot water — up to 7l / h, for cold — at least 2 liters per hour. Pouring occurs by pressing a glass on the lever of the spout of hot or cold water. Color options: silver, white, red, blue, black. Device dimensions: 31x31x96cm. Made in China, 2 year warranty.

The model of a floor cooler with a top-mounted bottle is simple and concise in design, affordable in price. On the front panel there are two filling taps for cold and hot water. The supply is activated by pressing the tap tab with a cup. Management — on the back of the case with two separate toggle switches for heating and cooling. If the toggle switch is turned off, water at room temperature is supplied from the corresponding tap. The productivity of the device for chilled water is 0.6 l / h, for hot water — 4 liters per hour. The indicators are modest, but quite sufficient for a small number of users, 5-7 people, or for a room with low consumer traffic. Manufacturer — China, warranty — year.

Floor standing cooler in an original design housing with compressor cooling (compressor power 70 W) and water heating (500 W). Body with two pouring taps, pouring water — by pressing the lever with a glass. The bottle (19 liters) is installed from above. Heating capacity is about 5 l/h, cooling capacity is about 0.7 l/h. This is quite suitable for the needs of 10-15 people. Device dimensions: 36x38x102.5 cm. Made in China, one year warranty.

Floor standing cooler with bottom position of the bottle and a set of standard functions: heating (1500 W) and compressor cooling (90 W) of water. The design of the device in the form of a tea table with a tap: cold water and water at room temperature are supplied for distribution through a single tap, the supply is activated by the corresponding control buttons. To obtain hot water, the kettle supplied with the cooler is filled with water at room temperature through the tap, then the “heating” mode is switched on by the corresponding button on the panel. The case has a built-in cupboard for glasses (5 liters). The package includes 2 teapots: for brewing and for boiling. The device cannot be called primitive: to use it in full functionality, you need to study the instruction manual in detail. Made in China, 2 year warranty.

The floor cooler with a tea table or, tiabar, has a bottom loading bottle, and at the top of the device there is a cozy tea corner: a kettle for boiling/heating water to a predetermined temperature and a teapot, which can be constantly maintained at a temperature of 60°C, if the corresponding function is activated. The housing has a cooling tank, the chilled water capacity of the device is 1 l/h. Heating power — 1.35 kW, cooling power — 75 W. A plastic tube is lowered into the bottle installed at the bottom of the case, through which, with the help of an electric pump, water is pumped to the tea table above. There is a spout for water supply. And also, on the black glossy surface of the table in the front there are 2 displays (separately for the heating kettle and teapot) and touch control buttons. Cooler dimensions: 35.5×35.5×102 cm. Country of origin — China, warranty — one year.

A classic cooler with a bottom-mounted bottle of a design familiar to most users: a floor-mounted case with three taps for cold, hot and room temperature water. The bottle is located in the lower compartment of the body. The device uses electronic cooling technology. Power consumption: 650W for heating and 70W for cooling. Water supply control — push-button. Heating capacity — 6 l / h, cooling — 0.6 l / h. Size 31x34x104 cm. Made in China, warranty — 2 years. There is a more expensive version — Vatten L48WK / L48NK / L48SK — with compressor cooling, cold water capacity 2.5 l / h, 1 tap (instead of 3), illumination of the distribution area.

The floor cooler, in addition to heating and cooling water, is equipped with a small refrigerator for drinks, sweets, fruits. Heating power is small — 450 W, heating capacity: 5 l / h. Compressor cooling power — 100 W, water capacity with a temperature of about 10 ° C: 3 l / h. On the rear panel there are two toggle switches for activating/deactivating the heating and cooling modes. The bottle is placed on top. Made in China, 2 year warranty.

Our rating of the best water coolers continues with a floor cooler with a bottle on top and a small refrigerator at the bottom. On the front panel there are two faucets separately for cold and hot water. The pouring of water occurs by pressing the edge of the glass on the faucet lever. Productivity for cold water — 3 l / h (compressor cooling), for hot — 5 l / h. Power, respectively, is 120 W and 500 W. Dimensions: 30x31x94.5 cm. Chinese product, one year warranty.

The bottle top cooler is equipped with a 650W water heater and a 120W cooling compressor. The device is designed to serve about 20 people, hot water capacity — 6 l / h, chilled — 2 l / h. Three taps supply hot, cold and room temperature water. In addition to the usual functions, there is also a nice «bonus» — a small refrigeration compartment (volume 20 liters) for food and drinks. The overall dimensions of the cooler are 31x31x98 cm. The warranty period is 2 years.